Minelab X-Terra 505 Manuale delle Istruzioni Pagina 21
- Pagina / 41
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
38
39
reCovering the target
A trowel, knife or small spade are good tools
for recovering targets.
Once a target has been located, clear the
surface of loose material and check again for
a signal. If there is no signal then the target
is amongst the surface material. In this case,
search the surface material until the target
is located. If the target is still in the ground,
check again with pinpoint.
The aim, when digging, is to leave the area of
ground exactly as you found it. Using a sharp
tool, cut a neat portion of grass or soil and
place it on a plastic sheet. This prevents the
material being scattered around and allows the
hole to be relled.
Check the hole for the target. If it is not in
the hole, place the detector on the ground
with the coil at, pick up a handful of soil
and pass it over the coil. Be sure not to wear
rings, bracelets or a watch which will produce
a signal. Repeat this procedure until the target
is located.
Ensure that no other targets remain, then rell
the hole. All soil and portions of grass on the
plastic sheet should be returned to the hole
as neatly as possible. Step lightly on the soil to
compact it.
A long blunt-tipped screwdriver is
a good tool for soft ground.
Probe the soil to nd the exact
location of a target, if it is very
shallow, simply prise it out.
Ask for permission before
searching on private property.
Leaving holes, or a scarred area
may result in action being taken to
prevent the use of metal detectors.
Please ensure that you leave an
area of ground as it was found.
Try to take all rubbish.
- Instruction Manual 1
- Congratulations on 2
- Contents 3
- Control Box Coil 4
- ConneCting the Coil 6
- ConneCting the Control box 7
- Coil Cable assembly 8
- Keypad layout 11
- 16 nonferrous3 ferrous 16
- 11 nonferrous1 ferrous 16
- Pattern 1 17
- All Metal Pattern 17
- Pattern 2 18
- Pattern 3* 18
- Actual depth will be more 22
- Detection 24
- Settings 24
- Detection Settings 24
- Speaker/Headphone Threshold 27
- 4” (10 cm) 31
- ID using an actual target 32
- ID using + or – 32
- Coil identifiCation 35
- Care of your x-terra 37
- Connecting Headphones 38
- Skid Plate 38
- Environmental Cover 38
- To attach an accessory coil: 38
- Short Shaft 38
- X-Terra 505 39
- Model Features 39
- X-Terra 305 39
Prodotti e manuali riguardandi Misurazione, test & controllo Minelab X-Terra 505
(41 pagine)
(74 pagine)
(47 pagine)Canon PIXMA G3410 manuales
Manuales del propietario y guías del usuario para No Canon PIXMA G3410.
Ofrecemos 3 manuales en pdf Canon PIXMA G3410 para descargar gratis por tipos de documentos: Manual de usuario
Commenti su questo manuale